By continuing to use the site, you are agreeing to our privacy policy.

NEWS / UPDATES

Security Code Setup for Non Illuminated Electronic Locks

Non-illuminated Electronic Lock Setup Instructions for Safes

Please be very careful when setting up your new or used safe.

It is possible for all safes to tip forward if the shipping feet have not been removed. As outlined in the attached Owners manual, serious injury can result if a safe tips over.

Please read the Owners Manual prior to safe set up. A copy of the Owners Manual can be found at the link below.

The setup process and bolt-down process requires two people.

It is required for the steel shipping feet to be removed from the safe as the first step in the safe setup process.

While removing the bolts from the steel shipping feet, it is required that you have a second person hold and stabilize the safe to keep the safe from tipping.

While bolting down the safe, it is required that you have a second person hold and stabilize the safe to keep the safe from tipping.

If you are unable to safely perform this setup process or have any questions about the setup process, please contact our Customer Service department at 1-888-792-4264 for further assistance.

Please note the drawings of the two style shipping feet used on most long gun safes for proper removal.